Parking problem is a static traffic issue that arises in urban development. Static traffic is a form of transportation that exists relative to dynamic traffic, and the two are interrelated and influence each other. For vehicles in the city, they are dynamic when driving and static when parked. Parking facilities are the main component of urban static transportation. With the increase of various vehicles in cities, the demand for parking facilities is also constantly increasing. If the balance between the two is lost, parking facilities will be unable to meet the demand for parking space due to the growth of vehicles, leading to the problem of difficulty in parking cars. At this point, a three-dimensional garage appeared, which can effectively solve the problem of difficult parking in the city. Today, the Wuxin Intelligent Editor will talk about parking techniques:

1. Find a parking space based on the size of your vehicle:

Before parking in a three-dimensional garage, the first step is to determine the size of the parking space and whether it is suitable for your car. The majority of three-dimensional garages have clear restrictions on the length, width, height, and weight of the parked vehicles at the rear. If you are driving a mid size or lower level sedan, the impact is not significant. However, if you are driving a mid size or luxury car, you need to pay special attention to the length limit. Common standards for the length of a three-dimensional garage include 4.7 meters, 5 meters, and 5.2 meters, and you can choose according to your needs. If you are driving a "big car" such as Buick Regal, Mercedes Benz S-Class, BMW 7 Series, or Buick Enclave, Cadillac Escalade, I suggest you don't consider a multi-level garage. Generally, parking lots will offer preferential treatment for these models and provide ground parking spaces.

2. Maintain a vertical distance from the parking space on both sides of the vehicle, pay attention to the corners and find a suitable parking space. You can choose whether to reverse 90 ° into the garage or diagonally according to your daily reversing habits. From my own experience, I prefer leaning over as it feels relatively convenient. Of course, for many new drivers who have just graduated from driving school or those who pursue perfection, it doesn't matter if they like 90 ° right angle parking. In short, it all depends on your own preferences, and there is no such thing as which one is better or which one is not. But no matter what reversing method you use, you should leave a certain distance between the vehicle body and the parking space. If conditions permit, it is best to leave a lane left or right. If space is limited, try to ensure a margin of about 2 meters for easy observation and detours. At the same time, it can effectively reduce the risk of scratching between the side of the vehicle and the garage. In addition, when reversing, it is also important to pay attention to the distance between the front of the car and the obstacle in front, in order to prevent a collision with the front bumper while leaning towards the back.

3. Don't rush to pour it in at once. If necessary, you can move it several times. For skilled drivers, after determining the distance around the vehicle, it is not a problem to pour the car into the parking space. However, if you are not very sure, don't be impatient. It is better to move it forward and backward several times, align the car completely with the parking space, and then pour it straight into the parking space.

4. Pay attention to the rear of the car and make full use of various auxiliary devices inside the car. When the vehicle is parked in the parking space, the driver should pay more attention to the situation at the rear of the car. At this time, everyone can make full use of the reversing radar, reversing image and other functions in the car according to their habits to help themselves judge

After the vehicle is parked in the parking space, the driver should pay more attention to the situation at the rear of the car. At this time, everyone can make full use of the reversing radar, reversing image and other functions in the car according to their habits to help themselves judge.

5. Control the throttle well, fully enter the parking space through the limit band, and the final step of parking is to let the rear wheels press over the limit band. As the limit band usually has a slight slope, the driver needs to slightly increase the throttle, but be sure to pay attention to the control of the throttle force. You can slowly and tentatively refuel, and do not directly press the accelerator pedal, otherwise your rear end is easily injured. 6. When getting off the car, please fold the rearview mirror. When opening the trunk, pay attention to the distance from the top. After the vehicle is parked, fold the rearview mirror first when getting off the car. The main purpose of doing this is to facilitate yourself and the driver of the vehicle next to you to get on and off the car. In addition, when opening the door, also pay attention to the distance between the car door and surrounding obstacles. Finally, regarding the issue of retrieving items from the trunk, if you have companions, it is best to take them out of the trunk before parking and entering the garage. If you have not done so before or are alone, be sure to pull the trunk lid with your hand when opening it to prevent it from shooting into the protective plate or limit rod above the garage. For electric trunk lid models, it is necessary to control it through buttons according to the actual situation.

7. It is not recommended to drive in with the front of the car facing inward, as there is a high difficulty due to the difference in the inner wheels. After reading so many methods for reversing and parking, some people may find it troublesome and wonder if it is possible to drive in directly? We have also had practical experience with this, and the conclusion is that we do not recommend everyone to do so. Because there is an inner wheel difference (the difference between the turning radius of the inner front wheel and the turning radius of the inner rear wheel) when the vehicle is turning, the front of the car cannot enter the parking space, and there is also a risk of scraping the bottom iron plate of the parking space. Moreover, many parking garages do not allow parking in this way. Even if you park your car, the administrator will come over and ask you to park again. Therefore, we strongly do not recommend parking in this way.